Differences

This shows you the differences between two versions of the page.

--- repair [2021/09/06 14:48] – [Appearances] darryl
+++ repair [2021/09/06 14:49] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== Repair =====
-Repair Codes are utilised on equipment within field reports, the repair code is used to explain what work had to be done to a piece of equipment in order to fix it. Repair codes can be customised to be as specific as needs be, when adding a new repair code Specify the type of the repair in the "Description" field.
+===== Repair Code =====
-''Insert Image Here''
-when you add anew repair code you will need to assign it a code to the repair code you are adding, this acts as an identifier for the repair code e.g. "REPL". Then you you will need to give the code a description, the description as the name implies is the name of the code that you are adding e.g. "Part Needs Replacing".
-''Insert Image Here''
-If a repair cod is no longer needed you can tick the "Not Active" option to prevent the repair code from appearing on future equipment field reports.
-----
-===== Repair Codes =====
 Repair Codes are a dropdown code used on [[Field Report|Field Reports]], filled in by the [[Employee|Engineer]].