This is an old revision of the document!
Fault Codes
Fault Codes are used within the field report section as a way of identifying the issue with a piece of equipment at a site. Fault codes consist of a code and description, the code field displays a quick identifier for a fault code and the description describes specifically what a fault code is e.g. code could say “LK” and the description could say “Leakage”.
Insert Image
Fault codes are used on field reports to specify what issue a piece of equipment is having, on a field report when a piece of equipment is added, a fault code is required to be added, then a Repair code will also need to be added to show what work had to be done to a piece of equipment.
Insert Image Here
Fault codes can also be set as inactive if they are no longer required, this will stop the code from appearing on the dropdown for fault codes in future but if it has been used previously, those calls will still display that fault code.
Appearances
- Fault Codes are an integral part of equipment on field reports