Differences

This shows you the differences between two versions of the page.

--- fault [2021/08/26 10:23] – [Appearances] gareth
+++ fault [2021/09/06 14:49] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== Fault Codes =====
+===== Fault Code =====
-Fault Codes are used within the field report section as a way of identifying the issue with a piece of equipment at a site. Fault codes consist of a code and description, the code field displays a quick identifier for a fault code and the description describes specifically what a fault code is e.g. code could say "LK" and the description could say "Leakage".
+Fault Codes are a dropdown code used on [[Field Report|Field Reports]], filled in by the [[Employee|Engineer]].
+They are used to categorize the issue that has been found when filling in a Field Report. If a Field Report has multiple [[Equipment]] records, one Fault will be required per Equipment record.
-''Insert Image''
+Faults can be added, viewed and edited from the Codes list.
-Fault codes are used on field reports to specify what issue a piece of equipment is having, on a field report when a piece of equipment is added, a fault code is required to be added, then a [[Repair|]] code will also need to be added to show what work had to be done to a piece of equipment.
+{{ :faultcode.png?500 |}}
-''Insert Image Here''
+Faults can be added straight into the list, and edited using the pencil icon.
-Fault codes can also be set as inactive if they are no longer required, this will stop the code from appearing on the dropdown for fault codes in future but if it has been used previously, those calls will still display that fault code.
 ----
 ==== Appearances ====
-  * Fault Codes are an integral part of equipment on field reports
+  * Fault Codes are mandatory on [[Field Report|Field Reports]]
+  * Fault Codes are used in conjunction with [[Repair|Repair Codes]]