Differences

This shows you the differences between two versions of the page.

--- repair [2021/08/26 14:37] – created gareth
+++ repair [2021/09/06 14:49] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== Repair =====
-Repair Codes are utilised on equipment within field reports, the repair code is used to explain what work had to be done to a piece of equipment in order to fix it. Repair codes can be customised to be as specific as needs be, when adding a new repair code Specify the type of the repair in the "Description" field.
+===== Repair Code =====
-''Insert Image Here''
+Repair Codes are a dropdown code used on [[Field Report|Field Reports]], filled in by the [[Employee|Engineer]].
+They are used to categorize what has been done, or what state a machine/[[Site]] has been left in when filling out a Field Report. If a Field Report has multiple [[Equipment]] records, one Repair will be required per Equipment record.
-when you add anew repair code you will need to assign it a code to the repair code you are adding, this acts as an identifier for the repair code e.g. "REPL". Then you you will need to give the code a description, the description as the name implies is the name of the code that you are adding e.g. "Part Needs Replacing".
+Repairs can be added, viewed and edited from the Codes list.
-''Insert Image Here''
+{{ :repaircode.png?500 |}}
-If a repair cod is no longer needed you can tick the "Not Active" option to prevent the repair code from appearing on future equipment field reports.
+Repairs can be added straight into the list, and edited using the pencil icon.
 ----
 ==== Appearances ====
-  * Repair codes are featured on  equipment lines on field reports where they are used to specify the repair work that took place
+  * Repair Codes are mandatory on [[Field Report|Field Reports]]
+  * Repair Codes are used in conjunction with [[Fault|Fault Codes]]